Embroidery Solutions Logo
Embroidery Solutions Logo

Embroidery Machine Accessories Shop

Embroidery Machine Accessories Shop2022-02-15T13:09:15+00:00
    • HappyJapan TFA hoop for Sai Embroidery Machine sizes 90mm, 120mm, 150mm, 180mm
  • Magna Hoops


    The Magna hoop is an alternative magnetic holding frame. There are 3 sizes available which will assist with all the complex items that you are wishing to frame on your embroidery machine. No more fiddly ring screws and these frames eliminate any fabric burn from framing. Let me magnets do the work.

  • Tajima Sai Embroidery Frames


    HappyJapan hoop for Sai Embroidery Machine sizes 100mm and 300mm

  • HappyJapan/Toyota Haya Brand Bobbin Case Standard Size.
  • It is an easy to use cold water-soluble film/stabiliser. Pull away any excess stabiliser when your design is finished and any further pieces can be quickly removed using a simple water spray. This topping can be used on materials such as: Towelling, Fleeces and is used to prevent the loop or pile showing up through the embroidery.

    • 30cm x 100cm
  • The needle system DB x K5 has been specially designed for use in high performance machines. The main consideration was reducing skip stitches and thread breakage, maximum protection of thread and fabric, as well as loop pick-up.

    • Point style : FFG 
    • Light ball point
    • For general knit fabrics, woven fabrics made from cotton and/or synthetic sewing fabric.
    • 100 per box
  • LB5 embroidery machine lubricant spray was developed specifically for embroidery machines. Advantages include:
    • It stays exactly where you spray it, no drips or runs
    • The metered nozzle dispenses ¾mm per depression preventing over oiling and garment saturation.
    • Very cost-effective, over 3600 applications per can
    • Specifically engineered for use on Industrial Embroidery Machines Rotary Hook.
  • Bobbins Bobbins 3

    These practical pre wound bobbins hold the same amount of thread on each bobbin so they can be changed at the same time with minimum wastage. The box contains 144 bobbins without sides.

  • Mighty Hoops


    The Mighty Hoop is a strong magnetic hoop, which can be used on almost any embroidery machine. There is no need to adjust the outer ring of the hoop, because it holds the garment with magnetic force, and automatically adjusts for different thicknesses.

    • HappyJapan hoop replacment screws - pack of 10
  • 10cm x 35cm Sleeve/Trouser Frame. The standard field size of this frame is 360mm. The frame is double-height which makes it easy to frame up heavy or bulky items. The frame has a heavy-duty side screw to tighten the ring. This frame is available to fit all HappyJapan and Toyota machine brands.
    • The HappyJapan under thread bobbin winder is a compact solution for winding your own bobbins.
    • Size: 21 x 15 x 11 cm Weight 3KG
    • This stick B embroidery backing is for use with our 7 in 1 system. Special blue squares are in place to assist you with cutting
    • 25mtr x 50 mtr Roll
  • The Hoop Master Pocket Alignment Guide is designed to provide a precise alignment grid for pockets and striped shirts. It can also align lettering to existing logos. It is completely portable and makes hooping shirts with pockets and stripes simple. The Pocket Guide can be used with the HoopMaster,or your existing hooping device. Available in 12cm, 15cm and 18cm sizes.

  • The 7 in 1 clamping set works using a sticky backing option which opens up whole new opportunities for you embroidery business. This system allows you to embroidery where standard type hoops cannot get to. We can do everything from: Collars, plackets, cap sides, bottom of sleeves, bag flaps and backs of baseball caps with this great system.

    • This shoe clamp can be fitted in seconds to your machine and will able you to embroider those hard to read areas. Dual adjustable arms will hold the shoe firmly in place. This clamp can be adapted for most machines.
Go to Top